3000 pieces Conveyor Buffer Bar
The buffer bed of belt conveyor is the key equipment commonly used in the conveying system. It is used under the guide chute of belt conveyor and under the belt at the blanking point to cushion the impact of falling materials on the conveyor belt. The traditional buffer idler has poor buffer capacity, can not well absorb the strong impact of material falling, and is easy to break the support idler; In addition, the supporting idler is in linear contact with the conveyor belt, and the two rollers are suspended, which is easy to be penetrated by materials or other sharp hard objects, resulting in longitudinal tearing of the belt between the idler and the blanking port; The surface of the supporting roller is inelastic, and the surface is easy to adhere to materials and wear the belt after long-term operation, which will lead to belt deviation in serious cases; The belt between the two rollers is easy to sag, making the belt in the section of the blanking port wavy, making the sealing of the blanking port poor, resulting in material scattering and environmental pollution. The buffer bed can not avoid the problem of replacing the buffer idler. At the same time, it can improve the production capacity and reduce the maintenance cost. The ingenious design of the buffer bed changes the disadvantages of the traditional design, makes the buffer strip in the blanking area contact with the conveyor belt face-to-face evenly, and provides support for it, effectively prevents the uneven stress of the conveyor belt during material transportation, and greatly reduces the maintenance and repair caused by the impact damage of the conveyor belt. The use of the buffer bed is to effectively prevent the damage of the conveyor belt, prevent material splashing, reduce the cost of daily repair and maintenance, and ensure the smooth operation of the conveyor belt.
Zhengzhou Bai-ott New Material Co., Ltd was registered in 2008 as a specific export company in conveyor belt maintenance products system manufacturer. After more than 10 years development, till now we have four departments commit to product quality and service supervision from raw materials till after-sale service, which are R&D laboratory center comply with Chinese national standard, Product branch, Business branch and Engineering branch.Our one stop conveyor line maintenance products also developed to three complete systems can meet 80% of your requirements and product demand.
If you have any question, please click here to Contact us.